What problems should be paid attention to when installing LED outdoor display screens?

With the increasing variety of outdoor LED displays, it has brought us a lot of good visual experience, so the demand has been increasing. In addition to the quality of the product itself, the installation of the outdoor LED display is also a very important step to ensure the safe and stable operation of the LED display. Today, LED display manufacturer-Litop will tell you about the installation points of outdoor LED displays.

LITOP provides high quality and cost-effective outdoor LED display

In fact, there are many more factors that need to be considered in the installation of outdoor LED display screens than indoors. If we do not pay attention to them, we will encounter a lot of troubles in the process of project implementation. When we choose an outdoor LED display, the first consideration is the waterproof and impact resistance of the overall structural design of the outdoor LED display. In order to ensure that these are all up to standard, we need to pay attention to the following points:

1. Installation location: Party A should first determine the exact location of the outdoor LED display installation. Then according to the site situation, the LED display manufacturer will provide correct suggestions for the selection of Party A's LED display.

2. Take photos of the outdoor LED display installation site, and indicate the width and height of the installation wall, and whether the ground should be laid with anti-static floor at that time. If a floor is laid, the height of the static floor should be calculated.

3. Power supply: There should be a power socket at the location installed on the outdoor LED display. In order to use it on the outdoor led display, the power cord should be as thick as possible according to the power of the outdoor led display.

4. Maintenance channel: If the outdoor LED display is installed on the floor, a maintenance channel must be left between the outdoor LED display and the back wall to facilitate screen heat dissipation, installation and debugging by technicians, and future screen maintenance. The maintenance channel depth of LED display manufacturers is recommended to be between 600-800mm, which can accommodate employees to work in the channel.

5. Wiring: It is hoped that all video cables extend to the maintenance channel behind the splicing screen. At that time, the video matrix will be placed behind the large LED screen. The video cable should be connected to the video matrix. Party A shall determine the placement of the large screen control computer. After determining the location and the number of computers, each computer must arrange the specified video link line on the maintenance channel behind the large screen. Between the computer and the large screen, two network cables should also be arranged in the maintenance channel for communication control.

6. Heat dissipation problem: There is an independent cooling fan behind each processor of the outdoor LED display. At the same time, LED display manufacturers also recommend that you install at least one air conditioner indoors on the LED display, mainly to adjust the temperature when the temperature is too high.

7. Install and fix the base: Stand on the ground with two steel pipes under the outdoor LED display screen, and install blasting screws to fix it on the ground. There will be steel pipes and walls behind the screens, secured with blasting screws. Once fixed, the entire screen is very solid.

The above are some precautions for the installation of outdoor LED displays. Outdoor LED display manufacturers recommend that you check them before installing outdoor LED displays to ensure that the display can run smoothly. Which outdoor LED display is better? LITOP is a good choice, with good product quality and high cost performance, a variety of cases provide you with reference, and won the unanimous approval of customers.